Product Introduction
Product User Manual
This is a 21-Key Wireless Remote-Controlled 13-LED Diving Light. After receiving the product, please read this manual first and operate the product in accordance with the instructions. Thank you!
1. Initial Operation
First, twist the product's fixed backplate clockwise to separate the product from the backplate.
Then press the red power button at the bottom of the product—at this point, the 13 RGB LEDs will light up and automatically change colors.
Finally, pull out the battery insulating sheet at the bottom of the remote control. Now you can use the remote control to adjust the LED color, brightness, color-changing mode, and turn the LEDs on or off.
This is a 21-Key Wireless Remote-Controlled 13-LED Diving Light. After receiving the product, please read this manual first and operate the product in accordance with the instructions. Thank you!
1. Initial Operation
First, twist the product's fixed backplate clockwise to separate the product from the backplate.
Then press the red power button at the bottom of the product—at this point, the 13 RGB LEDs will light up and automatically change colors.
Finally, pull out the battery insulating sheet at the bottom of the remote control. Now you can use the remote control to adjust the LED color, brightness, color-changing mode, and turn the LEDs on or off.
For long-term non-use, it is recommended to turn off the red power switch at the bottom of the product to save energy and protect the battery.
2. LED Installation
The circular backplate can be fixed to the surface of objects (such as fish tank walls, swimming pool walls, etc.) using the glue provided with the product.
Before applying the glue for fixation, wipe the pre-installation area of the backplate clean.
Apply the glue to the product's backplate, then press the backplate against the cleaned surface.
Leave it for several hours until the glue dries—after that, the backplate will be fixed in place.
There are three circular fixing posts at the bottom of the light. Align these three fixing posts with the installation notches on the backplate, then twist the light counterclockwise slightly to fix the light to the backplate.
3. Product Charging
This product uses a 3.7V/2500mAh lithium-polymer rechargeable battery.
Before charging, press the red power switch to turn off the LEDs.
To charge, first open the blue silicone cover (at the position marked "5V"). Use a USB DC 5V power supply and the charging cable provided to charge the product.
During charging, the red indicator light will be on; when fully charged, the red indicator light will turn off.
When using the product again after charging, make sure to cover the charging port with the blue silicone cover.
4. Remote Control Instructions
The remote control is equipped with the following function keys:
2. LED Installation
The circular backplate can be fixed to the surface of objects (such as fish tank walls, swimming pool walls, etc.) using the glue provided with the product.
Before applying the glue for fixation, wipe the pre-installation area of the backplate clean.
Apply the glue to the product's backplate, then press the backplate against the cleaned surface.
Leave it for several hours until the glue dries—after that, the backplate will be fixed in place.
There are three circular fixing posts at the bottom of the light. Align these three fixing posts with the installation notches on the backplate, then twist the light counterclockwise slightly to fix the light to the backplate.
3. Product Charging
This product uses a 3.7V/2500mAh lithium-polymer rechargeable battery.
Before charging, press the red power switch to turn off the LEDs.
To charge, first open the blue silicone cover (at the position marked "5V"). Use a USB DC 5V power supply and the charging cable provided to charge the product.
During charging, the red indicator light will be on; when fully charged, the red indicator light will turn off.
When using the product again after charging, make sure to cover the charging port with the blue silicone cover.
4. Remote Control Instructions
The remote control is equipped with the following function keys:
16 color selection keys: Among them, the R/G/B/W keys correspond to 4 fixed colors; each of the other 6 keys has 2 colors (press once to switch to one color).
4 RGB light mode keys: For selecting different color-changing modes of the RGB lights.
Two timing selection keys (4H/6H): When either key is pressed, the LEDs will flash 4 times or 6 times corresponding to the selected timing duration (4 hours or 6 hours).
One timer off key: Press this key to exit the timing mode.
Two function adjustment keys: Used to adjust the brightness of single-color lights and the speed of color-changing modes.
ON key: When the product's power switch is turned on, press this key to turn on the LEDs; pressing the ON key when the LEDs are already on has no effect.
OFF key: Press this key to turn off the LEDs.
4 RGB light mode keys: For selecting different color-changing modes of the RGB lights.
Two timing selection keys (4H/6H): When either key is pressed, the LEDs will flash 4 times or 6 times corresponding to the selected timing duration (4 hours or 6 hours).
One timer off key: Press this key to exit the timing mode.
Two function adjustment keys: Used to adjust the brightness of single-color lights and the speed of color-changing modes.
ON key: When the product's power switch is turned on, press this key to turn on the LEDs; pressing the ON key when the LEDs are already on has no effect.
OFF key: Press this key to turn off the LEDs.